Classic Rotary Phones Forum

Telephone Talk => General Discussion => Unusual Issues & Solutions => Topic started by: Xymox on August 16, 2022, 12:06:20 PM

Title: Code-A-Phone 700 list 1 - a few questions
Post by: Xymox on August 16, 2022, 12:06:20 PM
I have a almost fully working 700 ( KS-19241 L1) I am going to put back into full time use. I am restoring it and making it as new as possible again. It has bad caps, c12 ( main power supply can ) is getting hot and a sure sign it needs replacing. I am going to replace all the electrolytics as one of the tubular caps on the amp board is also toast.

I have now identified a operational issue I need to address t make it fully useful for me. This was way before you could get answering machines that could count rings and answer after say 4 rings. This answers on the first ring. This is 1970. It does however have a extensive interface set of terminals and terminals 1 and 2 when momentarily shorted will cause it to answer. I can disable its auto answer. SO what I am wondering is if anyone here knows of a circuit, or board, I could get that can count rings and produce a contact closure or a pulse ? I could then work this into the unit.

I would also be interested in some NOS tape of the WE specified type. 3M 591. While mine all works fine, I would love to put new tape on its outgoing ( deck A ) and incoming ( deck B ) cart.

Does anyone here have any experience working on these ?

Title: Re: Code-A-Phone 700 list 1 - a few questions
Post by: tubaman on August 17, 2022, 06:41:04 AM
This Service Manual is available from the TCI Library :