"The phone is a remarkably complex, simple device, and very rarely ever needs repairs, once you fix them." - Dan/Panther
Started by TelePlay, March 16, 2020, 08:08:27 PM
Quote from: FABphones on June 02, 2020, 02:15:24 PMThinking this through further for this application, the tank would need to be sizable so as not to cause issues with the heating elements.
Quote from: TelePlay on June 03, 2020, 03:08:15 PMI have been thinking of finding flat rubber sheeting, such as neoprene or similar flexible foam sheet product, to put on the outside of the plastic pail to better retain heat.
Quote from: Jim Stettler on June 03, 2020, 05:30:25 PMI have used a space blanket w/ backing for insulation between a cement floor and some carpet in my phone room at my last home. It made a very noticeable difference in the room temp.
Quote from: TelePlay on June 04, 2020, 08:34:59 AMYou said your space blanket had a backing and that backing is what is probably responsible for the insulating affects. Did you add your own the insulation, an additional product, with the space blanket or did you find a blanket that had the insulation sandwiched between the mylar layers? I'm thinking my best quick and cheap and temporary option is simply two layers of small bubble wrap wrapped around the pail, about 7 feet long and a foot or so high. The air bubble have reasonably good insulating properties and the wrap can be removed and rinsed off for re-use. Plenty of bubble wrap in my basement. Might try that if I decide to redo my last few lanterns.