News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

ITT 554 with 425E network.. Dial tone okay .. no RING

Started by john, March 02, 2012, 09:34:29 PM

Previous topic - Next topic

john

Okay.... been through all the wiring changes.... I think... moving the black wire from G to L1.... Still no ring... Help please.

Vern P

#1
I guess you have looked this up, but in case you have not, check the ringer wiring. 4 leads Red on L2, Black on L1, Slate (Gray) on A, Slate-Red on K.   For 2 leads. (I think I have this right)  Black on L1, Red on A, jump wire from L2 to K.

If the ringer is dead, I have NOS WE C4 ringes for $4+ship.

PM me if needed.
Vern P  

rtkjmk

I just wanted to thank everybody for the tip , changed the black lead from G to L1 and presto ,ring tones ! I had the same problem with my NE 554 .  I picked up a nice NOS 554 and installed it in my shop . I can HEAR the ring tones and it will outlast ME . Thanks for the help , Bob K Lockport NY :)