Found - WANTED *** Looking for a crank for a WE 315 with a 22A magneto

[RB]

Anybody got one for sale?

[Doug Rose]

Are you looking for the magneto or the just the crank handle?....Doug

[RB]

PM sent

[Doug Rose]

RB...here is what I have. I don't have a WE mag to test it  on. ...Doug

[Jim Stettler]

RB...here is what I have. I don't have a WE mag to test it  on. ...Doug

It has been a long time since I played with fire wood, but It looks like a WE crank to me.
If you know the thread of a WE crank you could check it with a bolt (assuming it isn't an odd thread).
JMO,
Jim S.

[RB]

Thanks Doug.
I am not sure if that one is too long???
The sample I have borrowed, appears smaller??? So, maybe more than one option???
I have included a pic. I hope this is the correct one.
This phone was modified, and incomplete when I got it.
Let me sort this out, and I will get back to you.
I have one other possibility to look at.
Thanks again.
Rod

[Desert Phone Guy]

Attached are a couple of photos of a WE type 22 Mag Crank.

It is available if this is the one you are looking for.

Thanks!

[Butch Harlow]

Attached are a couple of photos of a WE type 22 Mag Crank.

It is available if this is the one you are looking for.

Thanks!

Mine is exactly the same. It's from a 315H with 22 magneto. It seems to be 2" long to the center of the threads, the threaded shank is 1 3/8" and the thread seems to be 1/4" of a pretty standard pitch.

[Jim Stettler]

Mine is exactly the same. It's from a 315H with 22 magneto. It seems to be 2" long to the center of the threads, the threaded shank is 1 3/8" and the thread seems to be 1/4" of a pretty standard pitch.

Thank-you for the details Butch.
I am pretty sure this is the last generation of WE cranks. The early stuff was more ornate. Any compatible crank is better than no crank.
JMO,
Jim S.