News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

Align fingerwheel on AE dial

Started by dket5, April 07, 2013, 01:24:34 PM

Previous topic - Next topic

dket5

I have an AE dial on a Kellogg Redbar, but the fingerwheel doesn't line up with the numbers. Needs to be about 1/4 inch clockwise to line up correctly. I haven't been able to solve this. A little help please?


HarrySmith

It appears the goverenor may be out of adjustment. See the upper circled area, the counterweights are sticking out. In lower circle loosen the nut and run the screw down until the weights are inside. That may not fix the alignment issue but I think it will help.
Harry Smith
ATCA 4434
TCI

"There is no try,
there is only
do or do not"