"The phone is a remarkably complex, simple device, and very rarely ever needs repairs, once you fix them." - Dan/Panther
Started by Texas1880, March 31, 2019, 11:28:32 PM
Quote from: RB on April 01, 2019, 11:21:12 AMHi TexasI think the polarity thing may be resolved in the manner you suggest.The Co to ex 11 sounds possible.I believe the programmer phone is required to make changes to the box.Do you have the manual?
Quote from: Texas1880 on April 01, 2019, 02:07:46 PMI do have a copy of the manual
Quote from: HarrySmith on April 01, 2019, 02:57:05 PMDoes it contain the keypad overlay that gives you the programming keys for the proprietary phone?
Quote from: Texas1880 on April 01, 2019, 03:04:14 PMUnfortunately not
Quote from: Jim Stettler on April 01, 2019, 03:30:23 PMCheck this thread:http://www.classicrotaryphones.com/forum/index.php?topic=12413.msg130807There is a pdf for the programming overlay.I think there is a topic http://www.classicrotaryphones.com/forum/index.php?topic=16290.0that has all the manauls for the panasonic 308's and 616's
Quote from: HarrySmith on April 01, 2019, 03:58:51 PMI will check mine when I get home tonight to see of it is the same. That should help along with the manual to do any programming changes.
Quote from: Texas1880 on March 31, 2019, 11:28:32 PMAlso, instead of setting up a hunt group, can't I just use the default settings and run a short modular rj11 male to male cord from CO1 to ext 11?, thereby creating a 7 extension whole house ringer without much ado, by just dialing 9?
Quote from: Owain on April 01, 2019, 06:00:53 PMNot quite. Dialling 9 would put you onto dialling tone at ext 11. You'd need to dial ext 11, which would send ringing voltage into CO1, which will then signal an incoming call.You may need to set ext 11 to NOT ring on CO1. Otherwise ext 11 will ring CO1 which will ring on ext 11 which will ring CO1 in an infinite loop.Discussed athttp://www.classicrotaryphones.com/forum/index.php?topic=18689.0
Quote from: Texas1880 on April 03, 2019, 09:38:07 PM what's up with my 2500s? No tone, no response. Should I try swapping L1 and L2?