News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

Western Electric 1D2 with 32A board not sending ATCS Tones

Started by Hill Haven Telephone Company, March 24, 2020, 07:26:31 PM

Previous topic - Next topic

Hill Haven Telephone Company

So ive been playing around with coin trunks through asterisk on NPSTN, 

However I cannot get the darn 1D2 to send ATCS tones whatsoever.    However I can redbox the trunk just fine.  So its gotta be something in the phone itself. 

I have a 32A Board,  and 22B totalizer. 

I had to tie this shut on the totalizer to get the coins to go into the vault. 
See image below

Its always worked just fine as a regular phone on my system

Thanks again

rcourtney

Carefully untwist the added wire. Check the continuity of the coil. It has hair thin copper wire that can easily be broken. 
All dip switches set to the left?  Under the 32A there are base rate jumpers or switches.  Set those to your base rate. Can't be zero.  At lease one must be set.