Print Page - WE Operators Hanging Transmitter

Title: WE Operators Hanging Transmitter
Post by: Doug Rose on February 03, 2016, 06:08:40 PM

I won a real nice operators hanging transmitter, looks to be a Bower Barff finish. Much better than the flash pictures show it.

There are two holes in the top and I want to display it properly. Any information would be great..... many thanks....Doug

Title: Re: WE Operators Hanging Transmitter
Post by: Fabius on February 03, 2016, 08:20:12 PM

Quote from: Doug Rose on February 03, 2016, 06:08:40 PM

There are two holes in the top and I want to display it properly. Any information would be great..... many thanks....Doug

Buy A WECO switchboard missing a transmitter and arm.

Title: Re: WE Operators Hanging Transmitter
Post by: Doug Rose on February 04, 2016, 05:39:34 AM

Great advice Tom :o. This is a hanging transmitter no "arm" needed...Doug

Title: Re: WE Operators Hanging Transmitter
Post by: G-Man on February 04, 2016, 09:19:49 AM

Here is an example of a suspended transmitter.

Title: Re: WE Operators Hanging Transmitter
Post by: G-Man on February 04, 2016, 09:59:29 AM

Forgot to show the other style of arm for suspending transmitters.

Title: Re: WE Operators Hanging Transmitter
Post by: Doug Rose on February 04, 2016, 06:05:26 PM

thanks G-Man I guess that arm be scarce as hen's teeth.

Tom...you were correct it had an arm, my bad. I guess I will figure how to display it....thanks...Doug

Title: Re: WE Operators Hanging Transmitter
Post by: Jim Stettler on February 04, 2016, 06:48:55 PM

I did have a 19A (or similar). I don't recall selling it, but I haven't seen it around for a long time. It had a strange finish kinda a copper and black two tone finish. It appeared to be a real finish.

Jim S.

I think mine may of been AE, It was very close in appearance to the 19A.

Classic Rotary Phones Forum

Telephone Talk => Auction Talk => Topic started by: Doug Rose on February 03, 2016, 06:08:40 PM