"The phone is a remarkably complex, simple device, and very rarely ever needs repairs, once you fix them." - Dan/Panther
Started by coors, March 06, 2012, 08:01:48 PM
Quote from: BO on April 28, 2013, 11:54:00 PMThank you so much!!! We got this far. Not sure really what to do now but it looks like you narrowed it down to 3 things. Thank you again so much!!
Quote from: poplar1 on April 29, 2013, 12:02:29 AMDid you check the colors of the wires in the dial cord to make sure they are on the right terminals? After that, try removing one of the two temporary jumpers, then replace the upper housing. Then put that jumper back and remove the other jumper, and again replace the upper housing.
Quote from: poplar1 on April 29, 2013, 10:07:42 AMCheck all the other wires to make sure they are connected to the right terminals. Use either the diagrams or the list in a previous post.Looks like there would not be a wire connected to BKX screw on the backplate since the relay is missing. Try swapping the red and black dial cord wires in the upper housing so that the red dial wire is now on the BKX terminal in the upper housing and the black dial wire is on R terminal in the upper housing.
Quote from: HarrySmith on April 29, 2013, 09:43:49 PMNice job! Looks great in the booth! I like how it is in original used condition, not looking brand new. How about a dial card??