Author Topic: 60a rotary wiring diagram  (Read 369 times)

Offline Sigmaz

  • ***
  • Posts: 203
  • -Jon
60a rotary wiring diagram
« on: December 24, 2017, 12:29:31 AM »
Hey gang.
Does anyone know where I can find a wiring diagram for a 60a rotary assembly?

I have a 1c1 and I just cobbled together a rotary to dtmf converter that will allow me to put it back on the wall for dial ou service.

Iíve got it connected and working, but I think Iíd love to know where all the other connections on this terminal block go..


If I could find a wiring diagram for the entire 1c1 that would be probably even more useful.
Itís  got a 31a chassis and 60a dial.

Thanks.
« Last Edit: December 24, 2017, 10:39:22 AM by Sigmaz »

Offline paul-f

  • Hero Member
  • *****
  • Posts: 2927
    • Old Telephones as Entertainment!
Re: 60a rotary wiring diagram
« Reply #1 on: December 24, 2017, 11:08:54 AM »

If I could find a wiring diagram for the entire 1c1 that would be probably even more useful.


Look at BSP 506-411-401 (and other related documents) in the TCI Library.
   http://www.telephonecollectors.info/

Visit: paul-f.com         WE 500  Design_Line

.

Offline Sigmaz

  • ***
  • Posts: 203
  • -Jon
Re: 60a rotary wiring diagram
« Reply #2 on: December 24, 2017, 03:28:11 PM »
Thanks!

Offline Sigmaz

  • ***
  • Posts: 203
  • -Jon
Re: 60a rotary wiring diagram
« Reply #3 on: January 02, 2018, 07:08:07 PM »
Finished the build, installed, and working great.

Offline dsk

  • Hero Member
  • *****
  • Posts: 3385
Re: 60a rotary wiring diagram
« Reply #4 on: January 03, 2018, 05:31:53 AM »
The DTMF converter looks interesting, is it something just to solder together, or do we have to program the chip? All ifo to make one are welcome, maybe under this thread??:   https://goo.gl/jydQGR   

dsk
Please notify me of dead links in my postings.

C*NET +1 999-3011


I have even got a regular New York number :-) 646 570 1796

Offline Sigmaz

  • ***
  • Posts: 203
  • -Jon
Re: 60a rotary wiring diagram
« Reply #5 on: January 03, 2018, 07:01:32 AM »
The chip does need to be programmed but thatís not a big deal.
You can do it with an Arduino, a capacitor, and a few wires..

Jelly bean parts are cheap and the chip can be had for free if you make an easy samples request to Microchip (Atmel).
I can post more details, but I wouldnít be adding anything to the discussion.
Theyíve hashed it out pretty well over there...

I have built the simple unit, in that thread they seem to be picking at schematics and reengineering everything about the circuit..which may or may not apply to my configuration because Iím not using a desk set.
And where my connections terminate in the phone may not be attached to the same points they are using.
Iím just glad I can use my 1c1.. the reason for this post.

Lol
« Last Edit: January 03, 2018, 09:30:08 AM by Sigmaz »

Offline Babybearjs

  • Hero Member
  • *****
  • Posts: 2046
Re: 60a rotary wiring diagram
« Reply #6 on: January 04, 2018, 12:09:59 AM »
I hope that PC card is insulated, because its sitting on metal....
John

Offline Sigmaz

  • ***
  • Posts: 203
  • -Jon
Re: 60a rotary wiring diagram
« Reply #7 on: January 04, 2018, 05:36:58 AM »
Lol. Yeah it's sitting on a thick sticky foam pad.