Classic Rotary Phones Forum

Telephone Identification, Repair & Restoration => Telephone Wiring Diagrams => Non North American Wiring Diagrams => Topic started by: dsk on May 09, 2015, 10:38:11 AM

Title: Another Elektrisk Bureau Bakelite telephone 2 lines
Post by: dsk on May 09, 2015, 10:38:11 AM
Got this today, cords and handset are not original. (Handset 1960'ies)
It has lived a hard life, but it works.
1 Line for in/out, and an extra line for asking someone when line 1 is on hold. no transfer option.
Pictures, schematics, and scan from the 1938 catalogue.
dsk
Title: Re: Another Elektrisk Bureau Bakelite telephone 2 lines
Post by: dsk on May 09, 2015, 10:43:09 AM
From the catalogue: (1938)
Title: Re: Another Elektrisk Bureau Bakelite telephone 2 lines
Post by: Matilo Telephones on May 09, 2015, 12:52:21 PM
I actually was checking out a similar Phone by Ericsson last week.

My bottons are a bit different. Inside look virtually the same.

What is that thing on the back?
Title: Re: Another Elektrisk Bureau Bakelite telephone 2 lines
Post by: dsk on May 11, 2015, 09:26:23 AM
Now, I have the answer, it is for hanging the phone on the wall:
dsk
Title: Re: Another Elektrisk Bureau Bakelite telephone 2 lines
Post by: dsk on May 13, 2015, 02:08:18 PM
Still missing the right handset, so until something better pops up, I just added one made of Bakelite, probably German.  A pretty worn 1950's cloth covered handset cord and black glue made the cracks and holes better. I had the missing cradle part in stock.
Its Working.  No cleaning and polishing, just wiped with a cloth. 

dsk
Title: Re: Another Elektrisk Bureau Bakelite telephone 2 lines
Post by: HarrySmith on May 13, 2015, 05:48:40 PM
Looks good!
Title: Re: Another Elektrisk Bureau Bakelite telephone 2 lines
Post by: dsk on September 20, 2015, 03:32:28 AM
Yesterday I got a newer one (1941?), pretty like this, in worse shape, but with an holding coil, no diagram and model no so I'm not sure what I got.

I have measured as and tried to determine the circuitry, and it is mod of the one above.  The short on hold is replaced by a 500 ohms resistor (brownish button) One set of contacts on the hooks switch are used for external purpose.

dsk