Western Electric 664 type card dialer

[terryfeckett]

Does anyone have a operations manual to show were the leads are for the 18v power supply to run the W/E 664 type card dialer (rotary).

[Weco355aman]

Pair 21   V-BL / BL-V

[terryfeckett]

Thanks Phil,

Terry

[terryfeckett]

Hi Phil,

Hooked up the transformer but noting happens. Now when power is not on the phone and I insert the dialer card it will not come up to dial. Unless I push the release button next to the start. Does this normally happen when there is no power on the phone (18v)? and will operate when the 18V is applied?

Thanks for your help Phil,

Terry

[Weco355aman]

Try the V-O  / O-V
the card will not release without power.
The Touch-a-matic 32 uses the V-BL /  BL-V
You will not hurt any thing. I've hooked them up in the past.

[terryfeckett]

Hi Phil,

That was it the V/O-O/V pair allows the rotary card dialer to function. Thanks for all your help Phil,

Terry