Author Topic: Wiring Schematic for Integrated Hookswitch & Network for ATC Phones  (Read 604 times)

Offline RotoTech99

  • **
  • Posts: 738
Dear Forum:

I have a schematic for rotary ATC sets that use the PC network with a hookswitch mounted on it I'd like feedback on please.

The network was used in a number of ATC sets varying only in its shape to fit the set it was used with; All have the same terminals and components, the only difference being one had 4 straps for rotary dial use, or used 2 straps for tone dial use.

I'm presently working on the schematic for the tone dial sets using this network.

The information came from actual set examples and wiring charts already posted on CRPF that i carefully researched and checked.

A ITT ringer was used and the dial varied, but was either an ATC tone pad or Tamara rotary dial.

BTW: I tried to post this in "wiring diagrams" but encountered a couple glitches, and it didn't post. If possible, can this be placed in that topic, possibly under the name American Telecommunications Corp./ ATC diagrams, please?

Any feedback and advice is welcomed with Thanks.
RotoTech99
« Last Edit: January 27, 2021, 08:11:24 PM by RotoTech99 »

Offline RotoTech99

  • **
  • Posts: 738
pictures in Reference to schematic for ATC Phones with integrated net./hook
« Reply #1 on: January 28, 2021, 01:57:04 PM »
Dear Forum:

Here are pictures of the Empress network with combined hookswitch discussed in my topic regarding the schematic attached to the topic.

The network shown is for a tone dial set using two jumpers; the rotary configured network is the same, except it uses four jumpers.

Feedback and comments welcomed with Thanks
RotoTech99

Offline RotoTech99

  • **
  • Posts: 738
Re: Wiring Schematic for Integrated Hookswitch & Network for ATC Phones
« Reply #2 on: January 31, 2021, 07:25:56 AM »
Dear Forum:

Attached is the schematic for the ATC combined hookswitch/network when used with the ATC tone dial.

All feedback advice and comments welcomed.

RotoTech99

Offline RotoTech99

  • **
  • Posts: 738
Re: Wiring Schematic for Integrated Hookswitch & Network for ATC Phones
« Reply #3 on: February 02, 2021, 03:39:02 PM »
Dear Forum:

Attached are two revised and cleaned up versions of the two wiring diagrams submitted earlier... As always, feedback appreciated and welcomed.

Thanks,
RotoTech99
« Last Edit: February 02, 2021, 04:14:37 PM by RotoTech99 »

Offline HarrySmith

  • ***
  • Posts: 6714
  • 1937 302
Re: Wiring Schematic for Integrated Hookswitch & Network for ATC Phones
« Reply #4 on: February 02, 2021, 03:53:43 PM »
Thanks for sharing them.
Harry Smith
ATCA 4434
TCI

"There is no try,
there is only
do or do not"

Offline RotoTech99

  • **
  • Posts: 738
Re: Wiring Schematic for Integrated Hookswitch & Network for ATC Phones
« Reply #5 on: February 02, 2021, 05:34:14 PM »
Dear Forum:

Here are a couple photos of the set that I gathered information for this topic on.

RotoTech99
« Last Edit: February 02, 2021, 06:12:47 PM by RotoTech99 »

Offline RotoTech99

  • **
  • Posts: 738
Re: Wiring Schematic for Integrated Hookswitch & Network for ATC Phones
« Reply #6 on: February 06, 2021, 10:22:18 AM »
Dear Forum:

Here is a picture of the Standard Empress with the same network as the tone Empress, but with different jumper strap locations for rotary dialing.

RotoTech99

Offline Babybearjs

  • **
  • Posts: 3289
Re: Wiring Schematic for Integrated Hookswitch & Network for ATC Phones
« Reply #7 on: February 08, 2021, 01:19:58 PM »
wow! I'm surprised to see that... doesn't look like any WE network I've seen before.... very different layout... almost reminds me if the ITT networks that are in some of my phones.
John