News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

Polystyrene: UV Lamp Test

Started by FABphones, June 05, 2019, 11:46:18 AM

Previous topic - Next topic

FABphones

I've been busy this week trying out Peroxide bleaching of a (pure Polystyrene) AEI Neophone.

I've written down the procedure and results with photos but might be a tad long to read....?

Here is the last bit. I tried a Cream Peroxide treatment under UV lights.

The endcaps were under the UV bulbs for one hour.

What do you guys think, same or can you see any lightening?

I've been doing this Peroxide bleach experiment for 3 days, I would have continued for more than an hour today but other things called me away....

...everything looks like it has a tint of orange to me now.

Photos:
Before
During
1 hour later
A collector of  'Monochrome Phones with Sepia Tones'   ...and a Duck!
***********
Vintage Phones - 10% man made, 90% Tribble
*************

Pourme

I'm thinking, it will take much longer than a hour to tell any difference?

I like your set up...
Benny

Panasonic 308/616 Magicjack service

.....

I run my black-light overnight with the phone pieces in peroxide and water. That does the job.

FABphones

#3
Quote from: Pourme on June 05, 2019, 01:34:34 PM
I'm thinking, it will take much longer than a hour to tell any difference?

I like your set up...

Thanks.  :)

You are correct, more than an hour needed on this bit of the project .....I think after 3 days I got a bit impatient with this part. On reflection hourly intervals though most likely a good thing, this little unit of mine probably not safe to leave on unattended for long periods. Other chores called me away so not wanting to leave it unattended I had to call it a day.

Quote from: Duffy on June 05, 2019, 01:51:07 PM
I run my black-light overnight with the phone pieces in peroxide and water. That does the job.

That looks interesting. Black light....
Could you give more info on your setup?

Oh - Lightbulb (literally) moment, your photo has given me an idea....  :D



A collector of  'Monochrome Phones with Sepia Tones'   ...and a Duck!
***********
Vintage Phones - 10% man made, 90% Tribble
*************

kleenax

Quote from: Duffy on June 05, 2019, 01:51:07 PM
I run my black-light overnight with the phone pieces in peroxide and water. That does the job.
Have you tried short-wave UV light?
Ray Kotke
Recumbent Casting, LLC

.....

Quote from: kleenax on June 05, 2019, 09:48:32 PM
Have you tried short-wave UV light?

No I haven't, have you tried it?

Jack Ryan

Quote from: kleenax on June 05, 2019, 09:48:32 PM
Have you tried short-wave UV light?

That might give uneven results because of QSB.

Jack


Jack Ryan

Quote from: 280Parka on August 17, 2019, 06:52:24 PM
QSB?

Sorry, I should have refrained from posting that.

QSB refers to a variation of signal strength due to atmospheric or geographic conditions. It is common in long distance short wave radio transmissions.

It doesn't apply to nearby short wave UV transmissions. Short wave UV is higher energy UV.

Jack

kleenax

Quote from: Jack Ryan on August 17, 2019, 08:03:17 PM
Sorry, I should have refrained from posting that.

QSB refers to a variation of signal strength due to atmospheric or geographic conditions. It is common in long distance short wave radio transmissions.

It doesn't apply to nearby short wave UV transmissions. Short wave UV is higher energy UV.

Jack

Jack; wouldn't it be "apples n' oranges" considering one concerns radio waves and the other light waves?
Ray Kotke
Recumbent Casting, LLC