Classic Rotary Phones Forum

Telephone Identification, Repair & Restoration => Telephone Wiring Diagrams => Western Electric 500 Series Wiring Diagrams => Topic started by: olderdude60 on January 18, 2012, 05:54:44 AM

Title: WE 554 White A/B - wiring - GOT IT FIXED!
Post by: olderdude60 on January 18, 2012, 05:54:44 AM
HI All - It's me again - I had absolutely NO success in figuring out the wiring on my white WE 554 modular wall phone.   So, I thought I'd try this:  

Could someone who has a 554  take a picture of the 425E Network "topside" wiring?  A picture for me is worth a.......well you know the deal!

Mine stil gets crackling and popping when called from my cell, and no ring.

Thanks all - I appreciate this site immensely!

Jim
Title: Re: WE 554 White A/B - wiring
Post by: paul-f on January 18, 2012, 09:12:29 PM
It's usually difficult to trace wiring from photos, as it's a challenge to see both ends of a wire.

Try looking for the wiring diagram in the TCI Library:
  www.telephonecollectors.info

Since a 554 is electrically identical to a 500, you can also use a 500D diagram with 425E network.
Title: Re: WE 554 White A/B - wiring
Post by: olderdude60 on January 19, 2012, 09:07:54 PM
EUREKA! - I finally got the wiring issue cleared up - while examining the phone tonight and comparing it to my 500 desk - I discovered a small cut in the yellow line in wires attached to the modular wall plug on the back of the phone.   I replaced that and it works beautifully - I LOVE THAT W/E TELEPHONE RING!

Jim
Title: Re: WE 554 White A/B - wiring
Post by: twocvbloke on January 19, 2012, 09:11:06 PM
Quote from: olderdude60 on January 19, 2012, 09:07:54 PMI LOVE THAT W/E TELEPHONE RING!

It is a nice ring ain't it?  ;D