News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

Recent posts

#61
Telephone Troubleshooting and Repair / Re: 3554 ISSUE
Last post by poplar1 - April 19, 2024, 01:52:09 AM
Quote from: MMikeJBenN27 on April 18, 2024, 03:52:37 PMIn the picture, I see Red, Black, Slate, and Slate/Red.  Connect Slate to K and Slate/Red to A, the Red to L2, and the Black to L1.  It should work.

Agreed. Don't forget to move the slate (gray) hookswitch wire from A to L2.
#62
New Member Introductions / Re: New member
Last post by dsk - April 19, 2024, 01:10:34 AM
Welcome!
#63
Technical "Stuff" / Re: Western Electric 267 Trans...
Last post by Kmoody - April 18, 2024, 09:37:28 PM
Thank You. I just ordered that set from Ebay. I soaked the transmitter in paint thinner for a day and the old washer just about fell off on their own.
#64
Technical "Stuff" / Re: Western Electric 267 Trans...
Last post by TelePlay - April 18, 2024, 09:28:18 PM
These?

https://www.ebay.com/itm/133551340695

If so, these type of diaphragms don't have a tension adjustment, they are attached to the carbon capsule with a center screw/nut.
#65
And probably modernly chintzy as well.

Mike
#66
Hey everyone,

The last condenser I bought didn't have the blue tint, so I never installed it (at least I didn't lose much). However, I found a good replacement that is about the same dimensions of the cracked one, and more importantly has the blue tint. The 708 Headliner Duo doesn't have a separate heat filter, the condenser is tinted blue.

here's a link to the one I bought (I'm pretty sure it fits according to my math): http://www.ebay.com/itm/275462065872
#67
Something in the handset is probably not making a proper electrical connection.  I would try to dismantle the handset to see where the problem may be.  I have no idea how the inside of the handset looks.

Larry
#68
Thank you all for your replies. I have been reading several topics that indicate resolutions that involve hitting something, so today I hit the receiver against my chest, and surely, the noise stopped completely.

What does this point to? What should I do to resolve this permanently? Still open the entire thing?

Thanks for all your help
#69
Technical "Stuff" / Western Electric 267 Transmitt...
Last post by Kmoody - April 18, 2024, 08:29:54 PM
Does anyone know where I can get the 3 washer kit for a WE 267 tansmitter? And how to adjust the proper tension on the diaphragm?
#70
The philtel/phreaknet crew have  been working with expressnet,  id ask those guys too if their stuff does what yours is doing. 
https://philtel.org/2024/02/10/protel-programming-line.html