Wiring Question

[HarrySmith]

Correct, the shaft pushes the switch to make contact. There are 2 screw terminals. I will get a picture tonight.

[poplar1]

I am attempting to put a WE 425E network in a woodie. I picked up an empty wood wall phone years ago at a local auction. It was in storage for quite a while. It was redisovered during the move. The cabinet is in good shape but it was completely guuted, nothing inside. There is no dial and no ringer. I have 2 wires from the hook switch, 2 wires from the transmitter & 2 wires from the receiver. I tried hooking it all up like a 500 but I get nothing. Can anyone point me to a diagram that would work?

425-type network:
Input RR (Tip) and C (Ring)

Output:
GN = Receiver
B  = Transmitter
R  = Transmitter and Receiver

You can interrupt the line by adding the hookswitch in series with the ring side of line and C (rather than connecting the line to C).

No need for a jumper from F to RR if you connect Tip directly to RR.

[HarrySmith]

Some of you requested pictures of the magneto so here they are.

[dsk]

Great photos! And, yes it should be possible to connect the generator with 3 wires as in my first scetch with generator and ringer.