AEP Deskset - Like a GPO 332 but from Portugal

[Jack Ryan]

@ Jack Ryan - thanks for the information.

Your're welcome.

The mount is very much like that on a Siemens No10 dial, but is subtly different. This uses the two screws to hold both the card holder and the finger wheel onto the dial. On a No10 two screws hold the card holder to the finger wheel and a centre screw then fixes them to the dial. My mount still retains the centre hole, but it has not been countersunk as it would be for mounting to a No10.

That's right. It is not exactly the same but the mount, the number card and the switch pile are compatible with the No 8 or No 10 Siemens Brothers dials making the 24C a drop in replacement.

Jack