News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

1D2 payphone home conversion

Started by TinTin, December 29, 2016, 03:23:49 PM

Previous topic - Next topic

TinTin

Hello! i've been reading through the forum on the subject and while there is so much info  (and i'm sure the answer is here some where) i know so little about the subject that is makes little sense.
  Any way, i received a 1D2 for Christmas in hopes of using it in my garage as a extra phone. have tried a few things to get it to work via instructions on different sights such as tying the coin relay and trying to attach a phone jacks to the appropriate screws. hopefully some one hear can help (it will save face with my wife too). here are some images.

Payphone installer

I see the red and yellow wire conected you only need the red and green. red is ring green is tip. you do not need yellow.

TinTin

yes, thanks for your reply. i did figure it out today after putting 2 and 2 together and learning what ring and tip were. ! i am planning on taking some images of it with a clear explanation in case there are others out there who don't understand phone lingo. thanks for your help.