Classic Rotary Phones Forum

Telephone Identification, Repair & Restoration => Telephone Troubleshooting and Repair => Topic started by: tjmack99 on February 01, 2011, 07:58:08 PM

Title: 5302 dial mounting bezel
Post by: tjmack99 on February 01, 2011, 07:58:08 PM
So, on the inside of my 5302, where the dial is attached, there is a plastic ring (with 2 screw holes) that the dial screws into. One of the screw holes is ripped through, so it is useless. Can anyone tell me what this part is called and how easy it might be to find a replacement?
Thanks!
McCormack
Title: Re: 5302 dial mounting bezel
Post by: Dennis Markham on February 01, 2011, 08:10:31 PM
Tim,  that is a common problem.  You can get a small washer and put it on the inside side of the hole.  When you tighten the dial screw down it will hold the dial securely in place.
Title: Re: 5302 dial mounting bezel
Post by: tjmack99 on February 01, 2011, 09:28:04 PM
I can appreciate Yankee thrift, so I'll give it a shot, thanks!
Title: Re: 5302 dial mounting bezel
Post by: Doug Rose on February 02, 2011, 09:45:19 AM
Quote from: tjmack99 on February 01, 2011, 09:28:04 PM
I can appreciate Yankee thrift, so I'll give it a shot, thanks!
With Dennis ....it would be Tiger's Thrift. .....Doug