Classic Rotary Phones Forum

Telephone Identification, Repair & Restoration => Telephone Troubleshooting and Repair => Topic started by: dket5 on April 07, 2013, 01:24:34 PM

Title: Align fingerwheel on AE dial
Post by: dket5 on April 07, 2013, 01:24:34 PM
I have an AE dial on a Kellogg Redbar, but the fingerwheel doesn't line up with the numbers. Needs to be about 1/4 inch clockwise to line up correctly. I haven't been able to solve this. A little help please?

Title: Re: Align fingerwheel on AE dial
Post by: HarrySmith on April 08, 2013, 12:50:59 PM
It appears the goverenor may be out of adjustment. See the upper circled area, the counterweights are sticking out. In lower circle loosen the nut and run the screw down until the weights are inside. That may not fix the alignment issue but I think it will help.