Recent posts

#41

How To Post Photos on CRPF / Re: forum website

Last post by FABphones - April 13, 2024, 06:07:45 AM

Just about every question you could ask is answered here:

https://www.classicrotaryphones.com/forum/index.php?board=84.0

#42

How To Post Photos on CRPF / How do I attach images to post...

Last post by Babybearjs - April 13, 2024, 01:37:09 AM

OK, so you guys upgraded the software for this site.... where is the link to attach photos when posting a reply or just posting in general.... I wanted to share a photos in a reply and there was no link to add attachments....

#43

Wanted / Re: Wanted - Broken AE50 Wall ...

Last post by MMikeJBenN27 - April 13, 2024, 12:42:02 AM

Wish we could stop fools from doing that.

Mike

#44

General Discussion / Re: When called, is our line f...

Last post by ChrisW6ATV - April 12, 2024, 05:58:12 PM

Did the phone line pass thru the device?
I could imagine a s simple device that could shunt the first ring pulse and make a 'click', then let the rest of the ring pulses thru.

In my case, the device I had that I seem to remember having this "pre-ring" ability simply plugged into a phone jack and did not do any pass-through function.

It was, if I remember right, something like a one-or two-transistor amplifier with a capacitor to pick up the ring signal. The amplifier circuit (with its own separate power supply) fed or controlled a common doorbell/buzzer, which at 20 Hz makes an obnoxious sound. This was in my bedroom of my first "non-parents"  apartment in Chicago in 1980-82. We had a regular Illinois Bell wall phone in our kitchen that rang normally. Other phones that we added all had their ringers disconnected.

#45

Wanted / Wanted - Broken AE50 Wall Phon...

Last post by SUnset2 - April 12, 2024, 05:41:03 PM

I'm looking for a damaged Automatic Electric 50 wall phone that I can cannibalize for internal parts.  Front case can be broken or missing, I don't need the handset, dial or switchhook.

I have a phone that was lamped, and they removed all of the innards.  I need the wiring harness, induction coil, capacitor (condenser), switchhook (if attached to the wiring harness), ringer (if available)

(Photo is for reference of what this model looks like)

Thanks,
Paul

#46

Telephone Troubleshooting and Repair / Stromberg Carlson wont dial

Last post by bcarolla - April 12, 2024, 05:19:20 PM

Have several of the pictured phones on the ship that all wont dial. When the dial is turned the cam allows the NO switch to close so the dialtone goes away. When the dial returns to home the dialtone is back. Each of these phones has the green wire from the dial wiring block not connected. They actually have been covered intentionally. Does the green wire need to be connected somewhere I assume so. Can I use a DVM across the wires on the dialer wire block to determine if the rest of the dialer mechanics are working properly?

#47

Technical "Stuff" / Re: U1 vs. U3 Receiver Capsule...

Last post by paul-f - April 11, 2024, 11:33:31 PM

For reference the chart below is from BSP 501-220-100, issue 6.

There are lists of receiver types at several points of time in multiple issues of the BSP in the TCI Library:
https://www.telephonecollectors.info/index.php/search?q=501-220-100

(The second column is "Replaced by")

#48

Technical "Stuff" / Re: U1 vs. U3 Receiver Capsule...

Last post by gands-antiques - April 11, 2024, 10:05:28 PM

Thanks a lot. I've got a U1 with a varistor.  If that's the only difference, mine must be  equivalent to a U3 but just didn't get reidentified.

Thanks again..
Gary

#49

Technical "Stuff" / Re: U1 vs. U3 Receiver Capsule...

Last post by MaximRecoil - April 11, 2024, 08:15:16 PM

I may be wrong, but I think the only difference is the type of varistor. The U1 had a varistor in a metal package, like in the first attached picture. The U3 had a varistor in a small plastic package, like in the second attached picture.

The reason I think the varistor is the only difference is because a lot of U1 receivers got the newer plastic varistors installed and were relabeled "U3" at refurbishment centers, and I doubt very much that they changed anything on them at the refurbishment centers other than the varistor.

#50

Technical "Stuff" / U1 vs. U3 Receiver Capsules

Last post by gands-antiques - April 11, 2024, 06:37:54 PM

I'm trying to find out what the difference is between a U1 and a U3 receiver capsule.

Any information would be appreciated.

Thanks,
Gary