"The phone is a remarkably complex, simple device, and very rarely ever needs repairs, once you fix them." - Dan/Panther
Started by DavePEI, July 01, 2014, 12:29:43 PM
Quote from: DavePEI on July 23, 2014, 01:11:31 PMI have moved our extensive discussion of My Ten Line Magneto Cordless Switchboard received in one of these lots to the Switching area, magneto boards.http://www.classicrotaryphones.com/forum/index.php?topic=12328.0Dave
Quote from: DavePEI on July 27, 2014, 05:31:17 AMNext up in the queue is a desk model (I think Siemens) looking European dial phone with a lock and key in the left hand corner.
Quote from: twocvbloke on July 27, 2014, 04:21:18 PMQuote from: DavePEI on July 27, 2014, 05:31:17 AMNext up in the queue is a desk model (I think Siemens) looking European dial phone with a lock and key in the left hand corner. Looks like an Aussie PMG 800 series phone, not sure which model considering that it has the lock in place but I have seen them about... http://www.britishtelephones.com/aus/802.htm
Quote from: rdelius on July 29, 2014, 06:49:22 PMThat NEC test set is the one I used to adjust dials while at COT.There should be a lid with the 48V power supply.That strange middle eastern set was bought by Mr Marsh on ebay The guts were Ericssion .This set was the first thing bought on Ebay in the 1990s .Got taken we thought
Quote from: rdelius on July 29, 2014, 08:45:33 PMThe lid had a -48V power supply.Had to repair it a couple of times. I put test clips on the dial terminals switch on % direct ,adjust for 100% to calibrate it .this unit I bought from ITT in Raleigh when they closed the plant. sold this to COT and it sat at my desk for most of 25 years I rebuilt and adjusted dials there.Had no instructions but it worked well