"The phone is a remarkably complex, simple device, and very rarely ever needs repairs, once you fix them." - Dan/Panther
Started by BigBird0000, August 10, 2017, 05:38:16 PM
Quote from: BigBird0000 on August 10, 2017, 05:38:16 PMI was looking through an old bucket, and came across some network boards that Ineed id on, and hopefully a schematic.The black thing is the hook switch.I have photos posted on filefactory as I had problems uploading to this site.I have attached a few lower res pictures.
Quote from: BigBird0000 on August 11, 2017, 01:27:33 PMThanks for the AE info. Gives me something to go on.
Quote from: Alex G. Bell on August 10, 2017, 06:20:05 PMI did not open the high res photos because they are too large and time consuming to open. The site where they are loaded prevents them from being downloaded by simply right clicking and saving them, a much quicker way which normally works but this site forces the user to open the page in a browser.
Quote from: Alex G. Bell on August 11, 2017, 03:19:32 PMIt looks like this network was used in the AE 80E set which appears to use a network with cradle switch integrated onto the network board shown in Fig 9:http://www.telephonecollectors.info/index.php/document-repository/doc_download/4877-gsp-473-215-202-i6-aug81-type-80e-rotary-dialMore careful comparison of the network with the schematic shown in Fig. 4 would prove or disprove this but the wiring diagram at the top of this figure shows a close correlation between the terminal layouts in the photos and figure.
Quote from: Alex G. Bell on August 11, 2017, 03:19:32 PMBTW, photos 01 and 05 are essentially the same view.