"The phone is a remarkably complex, simple device, and very rarely ever needs repairs, once you fix them." - Dan/Panther
Started by Butch Harlow, January 19, 2019, 09:56:14 PM
Quote from: Key2871 on January 19, 2019, 11:08:48 PMYou could use a small rectified bridge and connect it so it dials out either way. But I think it's odd that your Panasonic would have correct polarity, but your voip wouldn't.Can you put a tester in the voip and see if the polarity is correct, and check your system as well. That way you will know what is backwards. Because it sounds like you don't have a polarity guard in Mickey.
Quote from: poplar1 on January 20, 2019, 01:57:00 PMButch, which jack is reversed == the VOIP jack or the Panasonic 616 jack?I have seen single line WE phones where the connections inside the phone had been reversed, possibly by the installer/repairman.Factory wiring has green on L1 and red on L2 or A.
Quote from: rdelius on January 20, 2019, 03:34:00 PMdid you try disconnecting the y and bk line cord wires?.They might short out the data pair on the 616 causing troubles.
Quote from: Ktownphoneco on January 20, 2019, 09:35:09 AMButch .... You could just use Micky on one Voip jack, and open that jack up and reverse the tip and ring and put the cover back on and plug mickey's line cord into the jack.Jeff