News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

AE starlite dial lamp assembly

Started by rbouch, January 26, 2019, 02:50:18 PM

Previous topic - Next topic

rbouch

Hi

Does anyone have drawings of how a Starlite 54F dial lamp assembly goes together?

I have one and it seems to have two reddish plastic wafers and then a metal plate the wires from the 110v plug hookup to.

How are these to be assembled?  Plastic wafer, plate, plastic wafer, or some other way?

If anyone out there knows could you give me some advice?

stub

#1
 rbouch ,
             AE used several different insulators for these. You have the red ones . Use only one insulator . Here are 3 more different insulators in 1st pic. Start with the dial plate, then electro-luminescent plate, then insulator and put it all back together . Hope this helps .  stub
Kenneth Stubblefield


dsk

Do not forget the plug with (or on early models in telephone) built in resistors to limit the current.

dsk