"The phone is a remarkably complex, simple device, and very rarely ever needs repairs, once you fix them." - Dan/Panther
Started by Greg G., April 17, 2013, 04:31:55 PM
Quote from: Mr. Bones on April 21, 2013, 01:10:23 AMThanks for the info! Does the same apply for '202's', or '211's'? I have zero candlesticks, thus far. Working on a remedy for that. Best regards!
Quote from: poplar1 on April 21, 2013, 11:29:50 AMLook at your "211s" and see if any of them are marked G-7 on the housing instead of G-1. If so, you can use the YT and YY contacts to break the two red leads.BSP 502-303-403 Issue 3 April 1964 in TCI library shows the contacts for a G-7 handset mounting, which is part of a 212L.
Quote from: poplar1 on April 17, 2013, 06:29:34 PMHere is a picture of the cording for a 151-AL (except that the red wire needs to move to the R on the terminal block and the black wire needs to be on BK of the dial).
Quote from: HarrySmith on January 15, 2014, 10:23:33 PMTry moving the ringer wires to the coil from the board.
Quote from: HarrySmith on January 15, 2014, 11:43:28 PMAs Poplar posted below Red to L1 and Black to K.