News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

New candlestick and help ID

Started by Gilas, November 19, 2013, 03:34:19 PM

Previous topic - Next topic

Russ Kirk

No that I'm an expert,  but I agree it is an Ackerman Boland.   Nice find!

Russ
- Russ Kirk
ATCA & TCI

Gilas

Thanks Russ!  Sarge, I looked at it and it's almost the same size as a 20T transmitter.  There is a difference in the depth of the cup however for sure.  If I can find where my wife threw my tape measure I will get some measurements. 

Sargeguy

What is the number of the 20T transmitter? 302?
Greg Sargeant
Providence, RI
TCI /ATCA #4409

Gilas

Sarge here is a side view of the 20T and the B-R. The cup width measure around 2 9/16.

Sargeguy

#19
The transmitter I have is larger than the 269w transmitter (small size) in my 20T and slightly smaller than the 311w (regular size) in my other 20T. I does not look as if it will fit your phone.  :-[

You should inquire on the TCI or ATCA listserv to see if anyone has one that size.  Another option would be to use an unmarked standard sized transmitter until you find the correct one.
Greg Sargeant
Providence, RI
TCI /ATCA #4409

wds

I'm curious to know what the size of your cup is.  I have a Julius Andrea that is about 3", an American Electric and a Chicago that is about 3 1/8", and the others are about 3 1/4 (all approx)
Dave

wds

There's a nice picture of your phone on page 77 of the Kate Dooner book - 2nd edition.
Dave