Text only | Text with Images

Classic Rotary Phones Forum

Telephone Identification, Repair & Restoration => Telephone Troubleshooting and Repair => Topic started by: debeaune on September 09, 2014, 07:10:41 PM

Title: Stromberg SC 554 Wiring Question
Post by: debeaune on September 09, 2014, 07:10:41 PM
Hello all.  I have a SC 554 I am putting a 228A Adapter plate on and am unsure of where to wire my plate into.  Can someone please ID my Terminals for tip/ring?  Thank you.  Enjoy the day!
Title: Re: Stromberg SC 554 Wiring Question
Post by: LarryInMichigan on September 09, 2014, 08:41:27 PM
Connect the green and red wires to the terminals marked 'L1' and 'L2'.  Tape the ends of the yellow and black wires (separately) and put them somewhere out of the way.

Larry
Title: Re: Stromberg SC 554 Wiring Question
Post by: debeaune on September 10, 2014, 05:41:07 PM
Larry, thanks bud, done.  Problem now is no ring on incoming, do I need to rewire something, don't think its a freq ringer.  Tim
Text only | Text with Images