News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

Switchboard Lamp Extractor Tool, Lamp Cap Extractor Tool & Operator's Dial

Started by Fabius, May 17, 2017, 09:16:05 PM

Previous topic - Next topic

trainman

K2 are 30v lamps, so will work great at 24v. I have a handful of k2s. I tried them. My mission was to search for currently produced lamps, to relamp my entire board, and buy spares.

So, i have the JKL 35A1 installed, and also bought enought of the Sylvania 24E, as backup, if ever such a time, if any, i run out of the 35A1.

Fabius

Quote from: Alex G. Bell on June 20, 2017, 11:57:27 PM
You need to check the cord supervisory lamps and the CO trunk unit line lamps in addition to the EXT line lamps.  BSP states all should be K2 for operation at 16-52V, or 2Y for 44-52V "if the tel. co. approves".

Yes, everything I've checked is a K2
Tom Vaughn
La Porte, Indiana
ATCA Past President
ATCA #765
C*NET 1+ 821-9905