"The phone is a remarkably complex, simple device, and very rarely ever needs repairs, once you fix them." - Dan/Panther
Started by TelePlay, May 07, 2020, 12:43:09 PM
Quote from: Babybearjs on March 27, 2021, 08:55:20 PMI have one on a yellow 564 and looked up the adjustment BSP. the governor wasn't braking and I wanted to adjust it. after reading and tinkering with the dial I discvovered to leave it alone as it took care of itself. the phone works fine now.
Quote from: TelePlay on March 27, 2021, 10:37:24 PMPost a link to that BSP. I doubt it exists. While the governor can be adjusted AFTER a dial is disassembled, cleaned and properly oiled during reassembly, this was not a field service function so I'd really be interested in reading how WE refurb shops did it instead of reading your undocumented findings from a BSP.Best would be to scan or print that BSP as a PDF file and attach it for everyone to read.Knowing how to adjust a 7C governor and having adjusted many, I doubt that BSP exists so prove me wrong, post it as a link or attachment and I will be forever grateful to you for providing it.
Quote from: HowardPgh on March 30, 2021, 11:38:03 AMWill this procedure cure the dial that is hard to turn when dialing? Dial returns fine but it is hard to turn in the clockwise direction. The dial I have is the Kellogg equivalent of the 7C.
Quote from: kleenax on March 28, 2021, 06:29:45 PMI think that I have a copy of the BSP that shows how to adjust governor on #7 - #9 dials; I will look tomorrow.
Quote from: paul-f on April 02, 2021, 01:14:35 PM6-type and later were intended to be replaced.