News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

302 Internal Parts Identified

Started by HarrySmith, April 04, 2014, 10:01:39 AM

Previous topic - Next topic

HarrySmith

I did a quick markup of some pictures of a 302 in response to a request by a member.
Attached for your considerations. Please let me know about any corrections or additions.
Harry Smith
ATCA 4434
TCI

"There is no try,
there is only
do or do not"

Scotophor

Very good, that should be quite helpful to some people.

Some suggestions for consideration: You could identify the condenser and condenser bracket separately, and the dial pulse contact springs separately from the normal/off-normal contact springs. Perhaps also the base plate and shell. Then again, maybe I'm getting carried away. Use or ignore these ideas as you see fit; you won't hurt my feelings.
Name: A.J.   Location: LAPNCAXG, EDgewood 6

poplar1

Harry, you got a bonus with that 302: a 4-conductor mounting cord (D4U?) that can be used with a 202 or 151-AL.
"C'est pas une restauration, c'est une rénovation."--François Martin.

Sargeguy

Nice.  SHould we put this in the wiring diagrams section for easy reference?
Greg Sargeant
Providence, RI
TCI /ATCA #4409

WesternElectricBen


HarrySmith

Sure , that sounds like a good idea. I pulled those pictures off my PC, I am not sure where I got them. Might be from one of my phones, might not :o
Harry Smith
ATCA 4434
TCI

"There is no try,
there is only
do or do not"