News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

Found= Western Electric 51AL Parts

Started by Bob S, December 12, 2018, 09:52:46 AM

Previous topic - Next topic

Bob S

Looking for We 51AL parts- perch, 2ea switch pile, Base plate, And the hook. Any help appreciated.

poplar1

The 50-AL, 51-AL, and 151-AL all look similar on the outside, but the insides are different. Are you sure you have 51-ALs, and not something else? If they are 51-ALs, you can always use the switch hook pileup from a 20-AL (non-dial).


50-AL, 51-AL, and 151-AL pictured below:
50-AL has a 4-conductor dial cord, 51-AL = 3-conductor; 151-AL = 5-conductor
"C'est pas une restauration, c'est une rénovation."--François Martin.

Bob S

Thank You I am Shure it  is a 51AL I have wiring diagrams from TCI and wire them using 3 and 4 wire subset cords. I use a #2AB dial. Ihave two of them now and this is going to be my finish on them I have polished all the brass parts that I have when I get the switch, Hook and base plate I will be able to put it together. I would like to get a second switch so I have a spare.

Bob S

Thank You Guys Steve had the parts I needed. I Thank every one for there help.