Having trouble with SC Fatboy with SC "C" type dial

[RotoTech99]

From: RotoTech99

I have received a second SC Fatboy; This one with a Stromberg "C" Series dial installed on it that I cannot determine the proper wiring for the dial after comparing it against the schematic for the Fatboy.

The SC dial was in place when I received it, and I prefer to retain it in the Fatboy. I guess the dial was installed by a refurbisher or after market.

The dial contact arrangement is similar to a AE 24 or 51 dial; The wires are connected to the **dial terminals as follows: WHITE on "W", BROWN on "B", a strap is between terminals "B" and "Y", GREEN on "GN", and RED on "R". **(These terminals are on the SC dial itself)

Inside the Fatboy, the dial wires are connected as follows: the WHITE wire is on "G" terminal, the BROWN wire is on "C" terminal, the GREEN wire is on "E" terminal,  and the RED wire is on "A" terminal

Is this the correct wiring for this type dial in a SC Fatboy?

I have compared diagrams I have to it, and really need help as this has me confused.

Thank you.