Author Topic: 302 Rings Only When Casing is not Assembled on the Base  (Read 2054 times)

Offline poplar1

  • Hero Member
  • *****
  • Posts: 6114
  • 1051-AL
Re: 302 Rings Only When Casing is not Assembled on the Base
« Reply #15 on: February 23, 2013, 04:50:58 PM »
In the photo, the green wire from GN to the hookswitch and the Red-Slate wire from L1 to R on the dial go through the metal clamp on the base and the metal post near the hookswitch; the other wires should also do this. And the spade lugs on the two black wires on BK of the dial sometimes give problems.
"C'est pas une restauration, c'est une rénovation."--François Martin.