News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

354 not breaking dial tone

Started by Gilas, September 15, 2012, 03:51:00 PM

Previous topic - Next topic

Gilas

So I started fixing up a 354 and found that although everything else works fine I can't get it to break dial tone.  Thinking that it might be the dial I threw another one in there and again same problem.  Any suggestions?  BTW used the schematic from here for the 354's.  Forgive the pictures I have pulled the wiring off and on so much trying to fix this that it looks a mess ATM.

poplar1

Wiring looks correct. If you remove the transmitter does dial tone go away? (This is a monitor condition where you can hear another phone off hook or incoming ringing, but you don't draw dial tone.) What about if you remove the yellow/brown wire from Y on the dial?
"C'est pas une restauration, c'est une rénovation."--François Martin.