Classic Rotary Phones Forum

Telephone Identification, Repair & Restoration => Telephone Wiring Diagrams => Western Electric 300 Series Wiring Diagrams => Topic started by: HarrySmith on April 04, 2014, 10:01:39 AM

Title: 302 Internal Parts Identified
Post by: HarrySmith on April 04, 2014, 10:01:39 AM
I did a quick markup of some pictures of a 302 in response to a request by a member.
Attached for your considerations. Please let me know about any corrections or additions.
Title: Re: 302 Internal Parts Identified
Post by: Scotophor on April 05, 2014, 01:48:11 AM
Very good, that should be quite helpful to some people.

Some suggestions for consideration: You could identify the condenser and condenser bracket separately, and the dial pulse contact springs separately from the normal/off-normal contact springs. Perhaps also the base plate and shell. Then again, maybe I'm getting carried away. Use or ignore these ideas as you see fit; you won't hurt my feelings.
Title: Re: 302 Internal Parts Identified
Post by: poplar1 on April 05, 2014, 08:35:29 AM
Harry, you got a bonus with that 302: a 4-conductor mounting cord (D4U?) that can be used with a 202 or 151-AL.
Title: Re: 302 Internal Parts Identified
Post by: Sargeguy on April 17, 2014, 05:19:08 PM
Nice.  SHould we put this in the wiring diagrams section for easy reference?
Title: Re: 302 Internal Parts Identified
Post by: WesternElectricBen on April 17, 2014, 05:22:18 PM
Looks good.

Ben
Title: Re: 302 Internal Parts Identified
Post by: HarrySmith on April 17, 2014, 05:24:37 PM
Sure , that sounds like a good idea. I pulled those pictures off my PC, I am not sure where I got them. Might be from one of my phones, might not :o