"The phone is a remarkably complex, simple device, and very rarely ever needs repairs, once you fix them." - Dan/Panther
Started by Rurorii, March 04, 2023, 05:56:03 PM
Quote from: G-Man on March 07, 2023, 02:12:18 AMIf you find that your dial does need adjustment, reference the jpeg that I have included below.
Quote from: G-Man on March 07, 2023, 02:12:18 AMYou will need to purchase or fabricate an adjustment tool to tune the coil's ferrite slugs. Be advised that the slugs can be brittle and if stuck, may shatter when too much force is applied. [/size]
Quote from: poplar1 on March 07, 2023, 03:17:29 PMWith a maximum deviation of 0.17%, I believe we have already ruled out the necessity of adjusting the frequencies.G-man: Any other component that you might think is failing?
Quote from: TelePlay on March 07, 2023, 08:27:10 PMWouldn't it be possible to place a buttset on the line after the wall jack (behind it) to listen in on the line for the handset being lifter (line going off hook and the dial tone starts) and then to hear the tones of each number being dialed?Wouldn't no dial tones heard in the buttset point to a problem between the DTMF pad and the line cord?
Quote from: Rurorii on March 04, 2023, 05:56:03 PM(Side note: I don't actually have a telephone service. Instead I am using an Xlink Bluetooth gateway, but i'm pretty sure this is not the issue as another phone worked fine with it)