Classic Rotary Phones Forum

Telephone Identification, Repair & Restoration => Telephone Wiring Diagrams => Topic started by: bobv on December 05, 2018, 10:59:29 PM

Title: FTR Diagram
Post by: bobv on December 05, 2018, 10:59:29 PM
Hi,
this phone is working, but no ringer sound. any help please

thanks
VB
Title: Re: FTR Diagram
Post by: LarryInMichigan on December 06, 2018, 07:23:52 AM
That is a Belgian RTT telephone.  From the diagram (link (https://telephonecollectors.info/index.php/browse/wiring-diagrams/all-wiring-diagrams/rtt-belgium/1142-ya-rtt/file)), it looks like you need to connect the 'S' terminal to the 'a' to connect the ringer.

Larry
Title: Re: FTR Diagram
Post by: bobv on December 06, 2018, 07:41:09 AM
Quote from: LarryInMichigan on December 06, 2018, 07:23:52 AM
That is a Belgian RTT telephone.  From the diagram (link (https://telephonecollectors.info/index.php/browse/wiring-diagrams/all-wiring-diagrams/rtt-belgium/1142-ya-rtt/file), it looks like you need to connect the 'S' terminal to the 'a' to connect the ringer.

Larry


Hi LarryInMichigan,,
thank you for the information, then I am going to try.

thanks
VB
Title: Re: FTR Diagram
Post by: bobv on December 06, 2018, 08:41:41 AM
Hi  LarryInMichigan,
you mean remove the ringer wire (Grey) from "S" terminal  move to Terminal "A"?
How about the "L1" and "L2"


thanks
VB
Title: Re: FTR Diagram
Post by: LarryInMichigan on December 06, 2018, 09:46:08 AM
Quote from: bobv on December 06, 2018, 08:41:41 AM
Hi  LarryInMichigan,
you mean remove the ringer wire (Grey) from "S" terminal  move to Terminal "A"?
How about the "L1" and "L2"


thanks
VB


It has been a while since I had my Belgian "kettle" open, but I believe that the terminals for L1 and L2 are marked 'a' and 'b'.  I would connect a jumper wire between the 'a' and 'S' terminals with the two line wires connected to 'a' and 'b'.

Larry
Title: Re: FTR Diagram
Post by: bobv on December 06, 2018, 10:01:33 AM
Quote from: LarryInMichigan on December 06, 2018, 09:46:08 AM
It has been a while since I had my Belgian "kettle" open, but I believe that the terminals for L1 and L2 are marked 'a' and 'b'.  I would connect a jumper wire between the 'a' and 'S' terminals with the two line wires connected to 'a' and 'b'.

Larry


Hi LarryInMichigan
I try this way, still ringer not working

thanks
VB
Title: Re: FTR Diagram
Post by: LarryInMichigan on December 06, 2018, 10:08:11 AM
It looks like the 'b' and "C2" terminals also need to be jumpered together.

Larry
Title: Re: FTR Diagram
Post by: bobv on December 06, 2018, 10:22:16 AM
Quote from: LarryInMichigan on December 06, 2018, 10:08:11 AM
It looks like the 'b' and "C2" terminals also need to be jumpered together.

Larry

Hi LarryInMichigan,

yes, working now :). thanks for your help


thanks
VB