News:

"The phone is a remarkably complex, simple device,
and very rarely ever needs repairs, once you fix them." - Dan/Panther

Main Menu

FTR Diagram

Started by bobv, December 05, 2018, 10:59:29 PM

Previous topic - Next topic

bobv

Hi,
this phone is working, but no ringer sound. any help please

thanks
VB

LarryInMichigan

#1
That is a Belgian RTT telephone.  From the diagram (link), it looks like you need to connect the 'S' terminal to the 'a' to connect the ringer.

Larry

bobv

Quote from: LarryInMichigan on December 06, 2018, 07:23:52 AM
That is a Belgian RTT telephone.  From the diagram (link, it looks like you need to connect the 'S' terminal to the 'a' to connect the ringer.

Larry


Hi LarryInMichigan,,
thank you for the information, then I am going to try.

thanks
VB

bobv

Hi  LarryInMichigan,
you mean remove the ringer wire (Grey) from "S" terminal  move to Terminal "A"?
How about the "L1" and "L2"


thanks
VB

LarryInMichigan

Quote from: bobv on December 06, 2018, 08:41:41 AM
Hi  LarryInMichigan,
you mean remove the ringer wire (Grey) from "S" terminal  move to Terminal "A"?
How about the "L1" and "L2"


thanks
VB


It has been a while since I had my Belgian "kettle" open, but I believe that the terminals for L1 and L2 are marked 'a' and 'b'.  I would connect a jumper wire between the 'a' and 'S' terminals with the two line wires connected to 'a' and 'b'.

Larry

bobv

Quote from: LarryInMichigan on December 06, 2018, 09:46:08 AM
It has been a while since I had my Belgian "kettle" open, but I believe that the terminals for L1 and L2 are marked 'a' and 'b'.  I would connect a jumper wire between the 'a' and 'S' terminals with the two line wires connected to 'a' and 'b'.

Larry


Hi LarryInMichigan
I try this way, still ringer not working

thanks
VB

LarryInMichigan

It looks like the 'b' and "C2" terminals also need to be jumpered together.

Larry

bobv

Quote from: LarryInMichigan on December 06, 2018, 10:08:11 AM
It looks like the 'b' and "C2" terminals also need to be jumpered together.

Larry

Hi LarryInMichigan,

yes, working now :). thanks for your help


thanks
VB