Author Topic: ITT 554 B Ringer Assist  (Read 735 times)

Offline debeaune

  • *
  • Posts: 144
ITT 554 B Ringer Assist
« on: February 18, 2015, 06:34:21 PM »
All, I have a ITT 554 B which I have not dealt with before.  There is a separate board under the dial which I cannot crack the code on.  I placed my L1/L2 on terminal 1 and 2 where there was an electronic ringer wired to but I would like to get rid of that and use the standard bell ringer on the phone.  I can see the ringer red goes to 3 and Black to 4.  Anyone have a schematic or can you advise what I need to change up to get this ringer to work?  Appreciate your help, have a great one.  Tim

Offline poplar1

  • ***
  • Posts: 6239
  • 1051-AL
Re: ITT 554 B Ringer Assist
« Reply #1 on: February 19, 2015, 07:55:45 AM »
This is a Stromberg Carlson (S-C) 2-line phone. It sounds like the ringer is connected to the second line. So try moving the red and black ringer wires to 1 and 2.
"C'est pas une restauration, c'est une rénovation."--François Martin.

Offline poplar1

  • ***
  • Posts: 6239
  • 1051-AL
« Last Edit: February 19, 2015, 08:26:15 AM by poplar1 »
"C'est pas une restauration, c'est une rénovation."--François Martin.

Offline debeaune

  • *
  • Posts: 144
Re: ITT 554 B Ringer Assist
« Reply #3 on: February 21, 2015, 06:16:50 AM »
Poplar, you nailed it, works perfectly now.  Thank you very much.  Tim