Author Topic: Contempra Handset Cords  (Read 5369 times)

Online Ktownphoneco

  • Hero Member
  • *****
  • Posts: 594
Re: Contempra Handset Cords
« Reply #15 on: September 09, 2015, 04:14:37 PM »
There's a 16 page section in a "Station Installation & Repair Manual" I have, dealing with the 3100 series sets, including the schematics.     I'll scan the entire section later today and post it.

Jeff Lamb

Online Ktownphoneco

  • Hero Member
  • *****
  • Posts: 594
Re: Contempra Handset Cords
« Reply #16 on: September 09, 2015, 06:57:09 PM »
Attached in "PDF" format, is the section on the N.E. Contempra 3100 series telephone set from the Bell Canada 1981 Station Installation & Repair Manual.
This was a "fast" scan job, and the paper used to make these manuals is thin, and whatever is on the other side of the page, tends to show through somewhat.     But everything is easy to read.

Jeff Lamb

Offline Contempra

  • Hero Member
  • *****
  • Posts: 926
Re: Contempra Handset Cords
« Reply #17 on: September 09, 2015, 08:44:38 PM »
Attached in "PDF" format, is the section on the N.E. Contempra 3100 series telephone set from the Bell Canada 1981 Station Installation & Repair Manual.
This was a "fast" scan job, and the paper used to make these manuals is thin, and whatever is on the other side of the page, tends to show through somewhat.     But everything is easy to read.

Jeff Lamb


Thank you Jeff for the pdf..
Denis

Offline poplar1

  • Hero Member
  • *****
  • Posts: 5553
  • 102C-6 = "Old Brass" Hand Telephone Set
Re: Contempra Handset Cords
« Reply #18 on: September 10, 2015, 05:53:49 AM »
Thanks, Jeff for furnishing the practice. At first glance, it appears that the 3100 base would be interchangeable with a 100 or 2100 base, agree?
"C'est pas une restauration, c'est une rénovation."--François Martin.

Online Ktownphoneco

  • Hero Member
  • *****
  • Posts: 594
Re: Contempra Handset Cords
« Reply #19 on: September 10, 2015, 09:38:33 AM »
Happy to provide it.      Yes, it appears that they are interchangeable.     

Jeff Lamb
 

Offline markosjal

  • ***
  • Posts: 242
Re: Contempra Handset Cords
« Reply #20 on: November 19, 2016, 02:17:41 AM »
I would think for the two additional leads it was for a lighted dial which I saw on one contempora MANY years ago.

Phat Phantom's phone phettish

Offline Contempra

  • Hero Member
  • *****
  • Posts: 926
Re: Contempra Handset Cords
« Reply #21 on: November 19, 2016, 11:58:58 AM »
I would think for the two additional leads it was for a lighted dial which I saw on one contempora MANY years ago.

Ah !,.. i've never seen a lighted dial on a Contempra ...Do you have a photo ?
« Last Edit: November 19, 2016, 12:03:15 PM by Contempra »
Denis

Offline markosjal

  • ***
  • Posts: 242
Re: Contempra Handset Cords
« Reply #22 on: November 29, 2016, 01:49:22 AM »
You must mean the photo in my photographic Memory.

See attached
Phat Phantom's phone phettish

Dominic_ContempraPhones

  • Guest
Re: Contempra Handset Cords
« Reply #23 on: June 30, 2017, 05:19:39 PM »
No, there was never a lighted Contempra.  Symphony 2000.  The digipulse circuit, as designed, required two additional leads to provide uninterrupted power to the dial.  It was line powered.