Author Topic: 302 Internal Parts Identified (Read 1718 times)

HarrySmith · « **on:** April 04, 2014, 10:01:39 AM »

I did a quick markup of some pictures of a 302 in response to a request by a member.
Attached for your considerations. Please let me know about any corrections or additions.

Scotophor · « **Reply #1 on:** April 05, 2014, 01:48:11 AM »

Very good, that should be quite helpful to some people.

Some suggestions for consideration: You could identify the condenser and condenser bracket separately, and the dial pulse contact springs separately from the normal/off-normal contact springs. Perhaps also the base plate and shell. Then again, maybe I'm getting carried away. Use or ignore these ideas as you see fit; you won't hurt my feelings.

poplar1 · « **Reply #2 on:** April 05, 2014, 08:35:29 AM »

Harry, you got a bonus with that 302: a 4-conductor mounting cord (D4U?) that can be used with a 202 or 151-AL.

Sargeguy · « **Reply #3 on:** April 17, 2014, 05:19:08 PM »

Nice. SHould we put this in the wiring diagrams section for easy reference?

WesternElectricBen · « **Reply #4 on:** April 17, 2014, 05:22:18 PM »

Looks good.

Ben

HarrySmith · « **Reply #5 on:** April 17, 2014, 05:24:37 PM »

Sure , that sounds like a good idea. I pulled those pictures off my PC, I am not sure where I got them. Might be from one of my phones, might not

If your visit to the Classic Rotary Phones Forum was enjoyable or helpful, you may tell us by making a small donation. The donation can be made safely via PayPal and will help to off-set the costs of the Forum operation. Thank you!