Author Topic: my first pay phone that now finnally works (Read 679 times)

garyh · « **on:** August 19, 2014, 03:54:25 PM »

finally got it working ,found little pieces of dirt I think keeping the coin validator from working .was just about to give up .read through the bell public service maint. manual tried a couple different wiring schemes for tb-2 but did no good .ripped it all down checked every wire and the tiny pieces of dirt were all I found ,amazing hahaha now onto a new project dsk your hunch was right thanks

WesternElectricBen · « **Reply #1 on:** August 19, 2014, 03:59:25 PM »

Very nice, I like it on that little stand.

Ben

dsk · « **Reply #2 on:** August 19, 2014, 04:30:59 PM »

Congratulations! A really nice phone, and probably well worth the job. Nice to get credit for my ideas, Thank you.

I am of that kind loving to figure out and getting thing in working order, some other here are better on making things look like new.
By some reason, I struggle with those last issues.

I know you have been warned, but this are just a start

within some time you have a house full of phones

The woodwork are nice too.

dsk

If your visit to the Classic Rotary Phones Forum was enjoyable or helpful, you may tell us by making a small donation. The donation can be made safely via PayPal and will help to off-set the costs of the Forum operation. Thank you!