Author Topic: Coiled cord for a WE 354?  (Read 1286 times)

Offline Mister Mike

  • *
  • Posts: 19
Coiled cord for a WE 354?
« on: September 27, 2015, 01:50:09 PM »
I'm now the proud owner of a 354, but it's mounted in the kitchen and my wife has to live with it, but she can't get past the straight 3' cord. She wants a long coiled cord like the old phone had, and to further complicate matters, she doesn't want a cloth cord.

It seems that a rubber coiled cord for a 554 with a G1 handset is easy to come by, but finding one for an F1 is a bit more difficult. Anyone know a good source for F1 handset cords that won't break the bank, or for something like this, am I better off rigging a G1 (or even a modular) cord to get the job done? Obviously this won't be super authentic, but I do want a round cord to look somewhat period-appropriate.

Offline mentalstampede

  • no deposit, no return
  • *
  • Posts: 461
Re: Coiled cord for a WE 354?
« Reply #1 on: September 27, 2015, 02:06:33 PM »
House of Telephones used to carry new-made cloth covered coiled handset cords. I['m not sure what the pricing is like, but it might be an option.
My name is Kenn, and I like telephones.

“Progress isn't made by early risers. It's made by lazy men trying to find easier ways to do something.” --Robert Heinlein

unbeldi

  • Guest
Re: Coiled cord for a WE 354?
« Reply #2 on: September 28, 2015, 07:24:32 PM »
You best bet is to use a coiled cord that was made for a 500-series telephone.
These had four conductors, but you can tie one of the white wires and the red wire together inside the phone to make an equivalent cord as for an F1 handset.  In fact this is what most 500-series sets did anyways, only a few models actually required the four separate leads.

The long rubber or later plastic cords for the F1 handset made in the 50s often have developed cracks in the jacket and are hard to find in great condition, I think.

For exhibiting a phone the long cords when found are usually a nuisance, and most of the time aren't the original cords anyways, so there is a good chance that they may be available from collectors.  I know I have pulled a couple, at least, off phones.  For a wall phone where there is amply room for the cord to hang, it's a different situation indeed.

Offline andre_janew

  • **
  • Posts: 1628
Re: Coiled cord for a WE 354?
« Reply #3 on: September 28, 2015, 07:35:11 PM »
The cord restraints for a 500 series telephone are different than those on a 300 series.  How do you deal with that?

unbeldi

  • Guest
Re: Coiled cord for a WE 354?
« Reply #4 on: September 28, 2015, 07:41:25 PM »
The cord restraints for a 500 series telephone are different than those on a 300 series.  How do you deal with that?

Indeed they are.  The thick rubber feed-through for the handset exit of the G1 handset has to be cut. It can be done with a sharp Xacto-blade length-wise, they are not molded onto the cord jacket.  I always save old cord restraints from unusable cords, so these can be reused, but I have seen them for sale on eBay as well.

Offline Mister Mike

  • *
  • Posts: 19
Re: Coiled cord for a WE 354?
« Reply #5 on: October 01, 2015, 02:15:59 PM »
I ended up ordering a round rubber coiled cord from The Old Phone Shop, which is made for F1 handsets. Not quite as long (or cheap) as the 4 lug cord I almost ordered, but the look of the cord was just a little more authentic, so I chose form over function. I'll post a photo when it comes.

Offline Mister Mike

  • *
  • Posts: 19
Re: Coiled cord for a WE 354?
« Reply #6 on: October 06, 2015, 03:50:52 PM »
I like the look of the straight cord just a little more, but this still looks good. Shipped quickly from The Old Phone Shop.

Offline TelePlay

  • Global Moderator
  • *****
  • Posts: 7251
    • . . . times keep changin'
Re: Coiled cord for a WE 354?
« Reply #7 on: October 06, 2015, 09:21:13 PM »
Rotated. Cord looks great!
« Last Edit: October 06, 2015, 09:23:33 PM by TelePlay »