Author Topic: Resistors in switchboard circuits  (Read 1409 times)

Offline RB

  • Hero Member
  • *****
  • Posts: 594
Re: Resistors in switchboard circuits
« Reply #30 on: April 24, 2017, 02:04:13 PM »
Good morning. Thanks for the reply.
I want to ease your concern a little.
I have been doing this sort of design/building for some time now.
my board is and will continue to function just as I have designed it to... ok, not my design, per say. but I modified it.
I was gonna wait till I had it a bit more assembled, but I think a pic or two, is warranted at this point.
I built the subscriber jack this weekend, and will repeat it 3 more times for a 4 subscriber board..so far, anyway.
After the jack assembly, it will be on to the signaling part, and then to the finish line...
Thanks again, for all the support.

unbeldi

  • Guest
Re: Resistors in switchboard circuits
« Reply #31 on: April 24, 2017, 02:23:42 PM »
Thank you for the pictures.  It looks like you do have a vision and a plan.
That's all I can tell right now.  A full circuit schematic would make it much easier to comment.
Best of success.

Offline RB

  • Hero Member
  • *****
  • Posts: 594
Re: Resistors in switchboard circuits
« Reply #32 on: April 26, 2017, 08:53:44 AM »
Thank you!
I will provide schematics and more pics when completed.
This is a fun project.
What shud I call it??? Frankinphone? lol

Offline RB

  • Hero Member
  • *****
  • Posts: 594
Re: Resistors in switchboard circuits
« Reply #33 on: May 08, 2017, 03:05:07 PM »
The LB side is complete! and working...
The CB side is almost complete, still working on the line lites, but everything else is there.
I posted the board in another post, "My new, vintage switchboard" but no response yet.
chk it out!