Author Topic: 6" Riobi Buffer (Read 242 times)

Doug Rose · « **on:** April 26, 2017, 06:10:18 PM »

I found this buffer in my basement when looking for something else

I forgot I had it. I don't think it was ever used. Is this something I could try on telephones? Any ideas or WAGs...thanks...Doug

TelePlay · « **Reply #1 on:** April 26, 2017, 07:34:05 PM »

That's the same orbital buffer I have, and many others so, and it works well with Novus 2 on the larger surfaces. I've also used it with Brasso on Bakelite but when I do that, I change the bonnets. Did a real nice job on my Bakelite brown radio cabinet. Saves the wrist.

Dennis Markham · « **Reply #2 on:** April 26, 2017, 07:56:44 PM »

In addition to hand polishing, I have worn out two of those Ryobi buffers. I don't like the bonnet that ties. It tends to come off. I use the buffer on plastic and Bakelite. Works great. I have purchased replacement terry cloth (elastic) covers at WalMart. Just hold on tight to the item being polished. I've splattered a lot of polish with one of these buffers.

~Dennis

If your visit to the Classic Rotary Phones Forum was enjoyable or helpful, you may tell us by making a small donation. The donation can be made safely via PayPal and will help to off-set the costs of the Forum operation. Thank you!