Author Topic: Placing a Fascist Kellogg 17G dial into a 302 type telephone  (Read 292 times)

Offline cccp68801

  • *
  • Posts: 16
Placing a Fascist Kellogg 17G dial into a 302 type telephone
« on: December 25, 2017, 05:32:49 PM »
 :-\I am out of 5H dials. I have a few Kellogg 17G dials which are similar to AE dials (I think) How can I wire up a Kellogg dial into a plain 302 type telephone? I suppose I can use 6A dials but I am out of them as well. Anyone have any 6A dials for sale?

Dick Capon
Retired FAA
No more airplanes!

Offline poplar1

  • Moderator
  • *****
  • Posts: 6269
  • 1051-AL
Re: Placing a Fascist Kellogg 17G dial into a 302 type telephone
« Reply #1 on: December 25, 2017, 09:21:49 PM »
Does the 17-G dial have 2 pulsing contacts (1,2) + 3 shunt contacts (3,4,5)?
If so, wire the 302 as follows:

1. Brown-yellow hookswitch wire to outside pulsing contact
2. Black handset wire and Black condenser wire to inside pulsing contact

4. Brown-blue hookswitch and white handset wire to the same terminal
5. Red jumper wire to R on induction coil (not L1)
"C'est pas une restauration, c'est une rénovation."--François Martin.