Author Topic: 2-Link Step Switch Project  (Read 971 times)

Offline pnwphtec

  • *
  • Posts: 11
2-Link Step Switch Project
« on: January 11, 2018, 01:24:29 AM »
Just finished latest 2-Link Step Switch System.

Built into a standard 19” by 7 ft. Rack. This is a 20 line 2-link System configured to have 1 or 2 party ringing service allowing for up to 40 lines. The Selectors are of the digit absorbing type which gives the system a 4 digit dialing capability. All the Step Switches are Western Electric. This is a basic system featuring Dial Tone, Busy Tone, & Interrupted 20 Hz (cycle) ringing. It has a small Tube type tone oscillator for tones and a mechanical Interrupter. It also has a single dial “9” access trunk for CO Line Outgoing calls. Another handy feature is an Auto Ring down circuit on the “0” level for connection to an Operator Cord Switchboard or equivalent. There is a 25 pair connector near the bottom of the Rack for all connections. PM if you would like more information.

Offline AE_Collector

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 7474
  • AE 2 - AECo's 1st Self Contained Desk Phone 1925
Re: 2-Link Step Switch Project
« Reply #1 on: January 11, 2018, 11:07:12 AM »
Are you building these for yourself or “to order” for someone? Maybe selling them? I’m sure there would be a market for these in various sizes though I’m sure you invest a lot of time building one.

Terry

Offline trainman

  • ****
  • Posts: 485
Re: 2-Link Step Switch Project
« Reply #2 on: January 11, 2018, 04:47:39 PM »
I know sourcing the parts would be difficult, but id really like a full parts and material list, schematic, wiring diagram, etc on how to build my own.

Offline pnwphtec

  • *
  • Posts: 11
Re: 2-Link Step Switch Project
« Reply #3 on: January 12, 2018, 03:05:45 AM »
I do build systems for fun & profit. This one is a museum quality display that needs a good home. Interested parties are encouraged to inquire.

It would be impractical to provide a detailed build plan for such systems.

Each one I build is "one of a kind" due to the fact that each one is assembled & engineered based on the parts available at the time.

With the vast assortment of step switch types that were made for different applications, one has to adapt support circuitry & configurations to match the hardware.

Offline AE_Collector

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 7474
  • AE 2 - AECo's 1st Self Contained Desk Phone 1925
Re: 2-Link Step Switch Project
« Reply #4 on: January 12, 2018, 01:58:54 PM »
That was my thoughts as well. So little equipment available and so many optional configurations. You would have to dig through what you had available and decide the best way to utilize it based on the amount of space you wanted this project to take up along with the number of hours to invest in it.

My SxS demo is a single 10 switch wide shelf with Finders through to connectors. It will process a 7 digit call. The only thing I wish was different is that it has only 3 or 4 Line & Cut-off Relays. If it had 20 or more I could connect a lot of phones to it like a PBX. I should work on that. Also it would have been better in a vertical rack rather than a long single shelf.

Hmmm, time to dig it out again soon!

Terry

Offline pnwphtec

  • *
  • Posts: 11
Re: 2-Link Step Switch Project
« Reply #5 on: January 17, 2018, 12:00:37 AM »
Forgot a detail about the pictured system, 2 Tone-to-Pulse converters are included to allow touch-tone dialing.

Offline Sigmaz

  • ***
  • Posts: 226
  • -Jon
Re: 2-Link Step Switch Project
« Reply #6 on: March 07, 2018, 06:51:10 AM »
Beautiful build!
I have the identical rack in my server room sitting empty, this is a perfect use for one.

What would a quality display piece like this be worth?

Thanks.
« Last Edit: March 07, 2018, 06:57:41 AM by Sigmaz »

Offline pnwphtec

  • *
  • Posts: 11
Re: 2-Link Step Switch Project
« Reply #7 on: March 11, 2018, 02:54:59 PM »
Sold for $5200.00

Offline AE_Collector

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 7474
  • AE 2 - AECo's 1st Self Contained Desk Phone 1925
Re: 2-Link Step Switch Project
« Reply #8 on: March 11, 2018, 07:51:44 PM »
You likely have TWO more on the go now! In the 90’s there was a CO that I frequented that still had just a few bays of abandoned SxS left. I kept thinking I should take some parts but couldn’t bring myself to take the cable cutters to the bank cables etc. One day I went in there to see it all gone. They had to add more air conditioning to the CO because of all the ADSL equipment and the SxS was in the way. You snooze, you lose.

Terry
« Last Edit: March 22, 2018, 10:04:30 AM by AE_Collector »

Offline Dan F

  • *
  • Posts: 83
Re: 2-Link Step Switch Project
« Reply #9 on: March 22, 2018, 12:58:05 AM »
Me too

I know sourcing the parts would be difficult, but id really like a full parts and material list, schematic, wiring diagram, etc on how to build my own.