Author Topic: FTR Diagram  (Read 100 times)

Offline bobv

  • *
  • Posts: 71
FTR Diagram
« on: December 05, 2018, 10:59:29 PM »
Hi,
this phone is working, but no ringer sound. any help please

thanks
VB

Online LarryInMichigan

  • Hero Member
  • *****
  • Posts: 4914
Re: FTR Diagram
« Reply #1 on: December 06, 2018, 07:23:52 AM »
That is a Belgian RTT telephone.  From the diagram (link), it looks like you need to connect the 'S' terminal to the 'a' to connect the ringer.

Larry
« Last Edit: December 06, 2018, 08:39:20 AM by LarryInMichigan »

Offline bobv

  • *
  • Posts: 71
Re: FTR Diagram
« Reply #2 on: December 06, 2018, 07:41:09 AM »
That is a Belgian RTT telephone.  From the diagram (link, it looks like you need to connect the 'S' terminal to the 'a' to connect the ringer.

Larry


Hi LarryInMichigan,,
thank you for the information, then I am going to try.

thanks
VB

Offline bobv

  • *
  • Posts: 71
Re: FTR Diagram
« Reply #3 on: December 06, 2018, 08:41:41 AM »
Hi  LarryInMichigan,
you mean remove the ringer wire (Grey) from "S" terminal  move to Terminal "A"?
How about the "L1" and "L2"


thanks
VB

Online LarryInMichigan

  • Hero Member
  • *****
  • Posts: 4914
Re: FTR Diagram
« Reply #4 on: December 06, 2018, 09:46:08 AM »
Hi  LarryInMichigan,
you mean remove the ringer wire (Grey) from "S" terminal  move to Terminal "A"?
How about the "L1" and "L2"


thanks
VB


It has been a while since I had my Belgian "kettle" open, but I believe that the terminals for L1 and L2 are marked 'a' and 'b'.  I would connect a jumper wire between the 'a' and 'S' terminals with the two line wires connected to 'a' and 'b'.

Larry

Offline bobv

  • *
  • Posts: 71
Re: FTR Diagram
« Reply #5 on: December 06, 2018, 10:01:33 AM »
It has been a while since I had my Belgian "kettle" open, but I believe that the terminals for L1 and L2 are marked 'a' and 'b'.  I would connect a jumper wire between the 'a' and 'S' terminals with the two line wires connected to 'a' and 'b'.

Larry


Hi LarryInMichigan
I try this way, still ringer not working

thanks
VB

Online LarryInMichigan

  • Hero Member
  • *****
  • Posts: 4914
Re: FTR Diagram
« Reply #6 on: December 06, 2018, 10:08:11 AM »
It looks like the 'b' and "C2" terminals also need to be jumpered together.

Larry

Offline bobv

  • *
  • Posts: 71
Re: FTR Diagram
« Reply #7 on: December 06, 2018, 10:22:16 AM »
It looks like the 'b' and "C2" terminals also need to be jumpered together.

Larry

Hi LarryInMichigan,

yes, working now :). thanks for your help


thanks
VB